Optical current transducer with bulk type Bi12SiO20 faraday sensor for power systems

Two types of optical current transducers (OCTs) have a bulk Faraday sensor inserted into the gap of an iron core and a porcelain insulator with optical fiber. The sensor consists of Bi₁₂SiO₂₀ (BSO) single crystal, a polarizer, and an analyzer. The OCTs satisfied the target performance requirement for fault location and metering and demonstrated maintained performance at some power utilities in Japan and the US. We have developed a fault location system that immediately detects the fault current with the OCTs, there by locating the fault section. The OCT can easily replace the existing support insulators for the disconnecting switch without any modifications to structure height or bus-bar. For metering requiring 0.3% class accuracy, use of a BSO with right optical rotatory power combined with BSO with left optical rotatory power results in a Faraday sensor with improved temperature characteristics. The OCT demonstrated 0.3% class accuracy for metering described in the current transformer Specifications of IEEE C57–13, 1993.     

光纤液位传感器检测原理探讨

叙述光纤液位传感器在贮油罐中的应用,提出实验所采用的方案。推导出液面高度公式,比较实现检测的两种电路的优缺点,同时对实验精度和测量范围进行了讨论。     

经纬仪二轴正交调整方法

本文叙述了经纬仪二轴正交调整的四种方法,其中对偏反射镜法作了理论分析。     

Linear calibration procedure for the phase-to-height relationship in phase measurement profilometry

Calibration of the relationship between height and phase is of uttermost importance to perform accurate 3D measurements in phase measurement profilometry. This work reports a different approach to this problem by first looking at the analytical expression for this relationship and determining the regime spanned by the fringe analysis method. The conclusions thus ascertained, amply justify confronting the analytical expression with a simple normalization procedure of the experimental data, with a remarkable matching between both results. In light of this, a linear calibration procedure with just one plane is proposed and verified experimentally.     

On Two Parallel Matched Gratings Demodulation Method of Fiber Grating Strain Sensor

The method of demodulation with two parallel matched fiber Bragg gratings( FBGs)system is introduced to enlarge the range of strain that can be detected by the FBG sensor system.     

Simplified analytic solutions and a novel fast algorithm for Yb-doped double-clad fiber lasers

In this paper, continuous wave Yb³⁺-doped double-clad fiber lasers (DCFLs) with linear-cavity are investigated theoretically and numerically using the rate equations. Under the steady state conditions, the simplified analytic solutions of Yb³⁺-doped DCFLs under considering the scattering loss are deduced in the strongly pump condition. Compared with the known analytic solutions in published literatures, our analytic solutions are more accurate, especially, at higher reflectivity of output mirror. In addition, a fast and stable algorithm based on the Newton-Raphson method is proposed to simulate numerically Yb³⁺-doped DCFLs. The results by simplified analytic solutions are in good agreement with those by the numerical simulation. Moreover, we have performed the optimization of an Yb³⁺-doped DCFL using the simplified analytic solutions and the numerical simulations, respectively.     

The hydrogen molecule in an arbitrarily oriented magnetic field

Summary The modifications induced by a magnetic field of arbitrary direction and intermediate strength (i.e not larger than 2.35·10⁵ tesla, the ?atomic tesla?) on the lowest singlet and triplet energy states of the hydrogen molecule are studied. Using a linear combination of products of field-modified atomic orbitals, it is found that increasing the field strength the depth of the singlet energy well increases and the equilibrium internuclear distance decreases, yielding more rigid and localized nuclear vibrations. For sufficiently strong fields perpendicular to the internuclear axis, the triplet state exhibits a bonding behaviour. An explanation of the above results is given in terms of the field-modified electronic-charge distributions in the internuclear region. Based on the thesis submitted by S. Basile to the University of Palermo for graduation in Physics.     

拖曳线列阵用光纤水听器的研究

报道了光纤水听器用于拖曳线列阵的研究结果。在保证光纤水听器声相位灵敏度的前提下, 优化设计了光纤水听器的结构,降低了光纤水听器的加速度灵敏度36dB。实验测得在20-1600Hz 频段,该光纤水听器的相位灵敏度为-162．7dB,频段内灵敏度的起伏为±0．7dB,加速度灵敏度小于-30dB。     

500.8 nmNd∶YAG青光激光器光学薄膜的设计与制备

从双波长激光运转及和频的机理出发，对LD泵浦Nd∶YAG，LBO腔内和频500.8 nm〖JP2〗青光激光器所使用的光学薄膜进行了设计和制备.在激光反射镜的设计上，为了达到最佳的和频输出，对膜系要求进行了深入分析.采用对谐振腔一端面反射率固定不变并通过对另一腔镜基频光的透射率进行调谐的方法, 在给出合理初始结构后，利用计算机对膜厚进行了优化.并采用双离子束溅射沉积的方法，通过时间监控膜厚法成功制备出青光激光器所使用的全介质激光反射膜, 在室温下实现946 nm和1064 nm双波长连续运转，并通过Ⅰ类临界相位匹配LBO晶体腔内和频在国内首次实现500.8 nm青色激光连续输出.当泵浦注入功率为1.4 W时和频青光最大输出达20 mW.     

高功率双包层光纤激光器受激拉曼散射和热效应的理论研究

 受激拉曼散射和热效应会限制光纤激光器功率的提高。利用高功率光纤激光器的速率方程和热传导方程，理论研究了双端泵浦和分布泵浦下双包层光纤激光器的受激拉曼散射和热效应，得到了光纤中的泵浦光、激光和斯托克斯光的功率分布，光纤激光器的输出特性以及光纤中的温度分布。分析表明，当泵浦功率增大到一定值时，光纤激光器中出现SRS，一部分激光功率会转移给斯托克斯光，影响激光功率进一步提高;与双端泵浦方式相比，分布泵浦下光纤激光器的斜率效率和最大输出功率相差不大，但是，光纤中的温度分布被有效地降低，因此，分布泵浦方式更为有效。